How is sodium tripolyphosphate made?
Jun. 10, 2024
How is STPP is Made, and Why Knowing How is Important
Sodium tripolyphosphate or STPP (Na5P3O10) is a concentrate form of phosphate with numerous important applications in industry, mostly notably in the manufacture of industrial and domestic dishwashing and laundry detergents.
If you want to learn more, please visit our website TJCY industrial chemical.
This is due to its high cleaning efficiency when used as a filler supplemented with surfactants. But more than just filling volume, STPP also adds alkalinity, sequesters calcium and magnesium, stabilizes metal oxide colloids, and provides a surface charge to allow for peptisation and the suspension of dirt.
Other conventional raw materials for detergents often focus only on neutralising the calcium and magnesium ions in the water or grime. This is a practical cleaning method, as the ions prohibit anionic surfactants (such as soap and linear alkylbenzene sulfonate) from dissolving and working effectively. But as STPP can do this and so much more, it has become one of the key raw materials for detergent production.
For such a functional industrial chemical, the process for producing sodium tripolyphosphate is surprisingly straight forward, but it is important to understand the details as they can severely impact product quality.
How STPP is made
The production process typically consists of three main steps.
1. A sodium compound, for example sodium carbonate (Na2 CO3) or sodium hydroxide (NaOH) reacts with phosphoric acid to form a mixture which contains monosodium phosphate (NaH2 PO4) and disodium phosphate (Na4 HPO4). The phosphoric acid is achieved through either a wet process or a furnace process.
2. The mixture is precipitated from solution to a solid and insoluble impurities are removed.
3. The mixture is heated until it thermally decomposes or calcinates the monosodium and disodium phosphates into sodium tripolyphosphate (Na5 P3 O10). The heating also ensures that excess water is removed through volatilization.
The product must then be milled into a powder, sieved, and packed before it is ready for sale.
This process can also produce different sodium phosphate products, such as sodium dihydrogen phosphate, trisodium phosphate, and disodium hydrogen phosphate, among others.
STPP from wet process or furnace process phosphoric acid?
Sodium tripolyphosphate made from furnace process phosphoric acid is more expensive than that made from wet process phosphoric acid as the furnace incurs larger heating costs. However, STPP made from the wet process product is likely to contain more impurities. The most notable contaminants are magnesium and silicon which may prevent the STPP from being used in some end products.
A flow chart showing the classic spray method (CM) and the dry single-stage method (DSM) of STPP production.For example, silicon can cause aqueous solutions containing STPP to appear cloudy. For this reason, food processing companies often favour STPP made from furnace process acid despite the higher cost.
Classic spray method vs Dry, single-stage method
It is also worth noting when considering grades of STPP that it can be produced through two main approaches: a classic spray method and a dry, single stage method &#; both of which have their advantages and disadvantages.
In the classic spray method, once the phosphoric acid has been neutralized with caustic soda (NaOH) or soda ash (Na2 CO3) it is dehydrated via a spray drying process. The dried mixture is then calcined in a rotary kiln to obtain sodium tripolyphosphate.
STPP is widely used in the ceramics industry.Alternatively, the dry, single-stage method neutralises the phosphoric acid with soda ash but also includes in this mixture a portion of recycled STPP. This substance is then dried and calcined in a rotary kiln in a single technical process.
Including recycled STPP to the mixture improves the process&#;s flow rate and protects against an agglomeration of the powder. More significantly, costs are lowered in the dry, single-stage approach as the spray method requires more energy for both drying and calcining as the phosphoric acid must be diluted for the neutralization process.
A recent study by a team from the University of Krakow and the Polish Academy of Sciences concluded that, &#;the dry single-stage method of sodium tripolyphosphate production to be the advantageous technological variant.&#; While a study published in the Polish Journal of Chemistry found that, &#;the production of STPP with the dry one-step method has the lowest impact on the environment among three assessed solutions.&#;
The quality of any raw material is very significant both in terms of price and its possible application.
It is therefore vital to only buy sodium tripolyphosphate from a trusted and respected trader or producer. It is also important to know if the phosphoric acid used was gained from a wet or furnace process, and to also consider the environmental costs of classic spray versus dry, single-stage methods.
Also key to the final quality of STPP is the quality of the raw materials used in its production, such as the phosphorus ore, silica, caustic soda, soda ash, and coke.
Unfortunately, less scrupulous suppliers of STPP may adulterate any of these input materials as well as the final STPP product to increase their short-term profits.
AG CHEMI GROUP is a trusted and well-respected supplier of sodium tripolyphosphate. They have been supplying industrial raw materials to manufacturers since and can provide high grade quality STPP (food grade) for delivery across Europe, Africa, Asia, and the Americas.
If you would like to know more about sourcing STPP please visit AG CHEMI GROUP or contact Timur on +420 777 227 387 or
Photo credit: Pixabay, Vansh Sharma from Pexels, Frank Habel from Pixabay, & David Dibert from Pexels
Process for making sodium tripolyphosphate from wet ...
1. Field of the Invention
The present invention relates to a process for making sodium tripolyphosphate with reduced amounts of magnesium and silicon impurities from wet process phosphoric acid.
2. Description of the Prior Art
Sodium tripolyphosphate (sometimes referred to hereafter as STPP) is used today in many agricultural, industrial and food applications. Specifically, it has been utilized as a fertilizer component, as a builder in synthetic detergents and as an ingredient in many foodstuffs.
STPP has been normally made by a process that includes the steps of (a) reacting a sodium compound such as soda ash (Na2 CO3) or caustic (NaOH) with either wet process phosphoric acid or furnace process phosphoric acid to form a reaction mixture containing monosodium phosphate (NaH2 PO4) and disodium phosphate (Na4 HPO4); (b) precipitating and thereafter removing insoluble impurities from the reaction mixture; and (c) heating the reaction mixture at elevated temperatures for sufficient time to thermally decompose or calcinate the two above-named phosphate compounds into STPP (Na5 P3 O10) and to simultaneously remove water from the reaction mixture by volatilization. It should be noted that such processes removed impurities present in the STPP feedstock strictly by precipitation.
STPP made from wet process phosphoric acid is generally less costly than STPP made from furnace process phosphoric acid because the latter type requires large amounts of thermal energy in its production. But, STPP made from the wet process generally contains greater amounts of certain impurities, particularly silicon and magnesium, which may prevent this type of STPP from being employed in certain applications. Specifically, it has been found that the presence of silicon impurities, and to a lesser degree, magnesium impurities, often may cause turbidity or cloudiness in aqueous solutions containing STPP. Thus, industries, like the food industry, which prefer clear aqueous solutions of STPP may have to employ the more expensive STPP made from furnace process acid.
Accordingly, there is a need for a better process for making STPP from wet process acid which can reduce the amount of silicon and magnesium impurities in the product. As stated above, insoluble impurities in the STPP feedstock were removed solely by precipitation techniques. As an example, see Chemical Abstracts, Volume 80, page s. However, it has been found that these strictly precipitation methods of purification are not efficient when the silicon and magnesium levels are each from below about 100 to about 800 parts per million (ppm) by weight of the feedstock. At such levels, their presence can still cause the undesirable turbidity, but their removal cannot be effected easily by precipitation without also losing valuable amounts of phosphate compounds. Thus, it is believed that an improved process for making STPP from wet process acid must remove silicon and magnesium impurities by some method other than strictly precipitation. The process of the present invention is directed towards such a method.
BRIEF SUMMARY OF THE INVENTIONThe present invention, therefore, is a process for making sodium tripolyphosphate from wet process phosphoric acid. This process includes the steps of:
(a) reacting wet process phosphoric acid with a sodium compound and forming a reaction mixture comprising an aqueous solution of Na2 HPO4 and NaH2 PO4 with silicon and magnesium impurities contained therein;
(b) adding a fluoride compound such as NaF to the reaction mixture; the amount of that fluoride compound added being sufficient so that the resulting molar ratio of F:(Si+Mg) in the reaction mixture is at least about 5:1;
(c) precipitating a major portion of the magnesium in said reaction mixture;
(d) separating the precipitated magnesium from the reaction mixture, thereby forming a clarified aqueous solution;
(e) heating the clarified solution at temperatures in the range of about 400° C. to about 700° C. for sufficient time whereby,
(i) a major portion of the combined sum of fluoride and silicon in the clarified solution is volatilized and removed from the solution; and
(ii) a solid sodium tripolyphosphate product is produced; and
(f) recovering the solid sodium tripolyphosphate product.
DETAILED DESCRIPTIONThe process of the present invention starts by reacting wet process phosphoric acid with a sodium compound such as sodium carbonate or sodium hydroxide and forming a reaction mixture comprising an aqueous solution of monosodium phosphate (NaH2 PO4) and disodium phosphate (Na2 HPO4). The typical reactions involved in this step are illustrated by the following reaction equations (A) and (B) wherein Na2 CO3 is employed as the sodium source:
2H.sub.3 PO.sub.4 +Na.sub.2 CO.sub.3 &#;2NaH.sub.2 PO.sub.4 +CO.sub.2 +H.sub.2 O (A)
2NaH.sub.2 PO.sub.4 +Na.sub.2 CO.sub.3 &#;2Na.sub.2 HPO.sub.4 +CO.sub.2 +H.sub.2 O (B)
The formation of NaH2 PO4 and Na2 HPO4 by reacting phosphoric acid with sodium carbonate or sodium hydroxide involves well-known chemistry and the process of the present invention may employ any and all conventional reaction parameters for carrying out this initial step. In other words, the first step of this process is not limited to any particular reaction parameters, other than the use of wet process phosphoric acid and sodium source such as Na2 CO3 or NaOH as initial reactants.
Additional reading:How Does Virtual Reality Gaming Work?
The Advantages of Incorporating EP Magnesium Carbomate Heavy in Your Routine
How to Obtain CAS 6303 21 5 Samples in Australia?
Unlocking Benefits of Heavy Magnesium Carbonate Usage
10 Facts You Need to Know about Magnesium Oxide for Tires
How Does Mindfulness Meditation Work?
How High Magnetic Magnesium Oxide Enhances Performance?
The company is the world’s best Sodium Tripolyphosphate supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Any conventional aqueous solution of wet process phosphoric acid may be utilized as a reactant for the present invention. Descriptions of such forms and how wet process phosphoric acid is made are described in detail in Waggman, W. H., Phosphoric Acid, Phosphates and Phosphatic Fertilizers, 2nd Edition, Chapter 12, Reinhold Publishing Corporation, New York, (). That chapter of Waggman is incorporated herein by reference in its entirety. Briefly, wet process phosphoric acid is usually made by digesting natural phosphate ore with sulfuric acid in an aqueous solution. Gypsum (CaSO4.2H2 O) is produced as a by-product and is filtered from the phosphoric acid. As stated above, wet process acid contains various amounts of impurities. The usual ranges of silicon, magnesium and fluoride found in most wet process acid solutions are listed in Table A.
TABLE A
______________________________________
Parts Per Million Parts
of Acid, by weight
______________________________________
Silicon 50-
Magnesium 50-
Fluoride 0- 300
______________________________________
The preferred phosphoric acid solutions for the present invention are aqueous solutions containing from about 15% to about 25% by weight P2 O5.
The sodium compound such as Na2 CO3 or NaOH employed as a reactant herein may be from a commercial source. Normally, substantially pure grades (i.e., greater than about 98% by weight) of soda ash or caustic are the preferable sources of this reactant because of the few impurities present. However, other sources of sodium such as sodium bicarbonate may be employed in carrying out the present invention.
In a preferred embodiment of the present invention, wet process phosphoric acid and sufficient Na2 CO3 or NaOH are reacted in a first reaction tank to form an aqueous solution of NaH2 PO4 as illustrated by equation (A), above. The molar ratio of these two reactants is preferably about 2:1. A portion of this aqueous solution containing NaH2 PO4 is then transferred to a second reaction tank wherein more Na2 CO3 or NaOH is added. An aqueous solution of disodium phosphate is thereby formed as illustrated by equation (B). This second reaction is also preferably carried out by having a molar ratio of about 2 moles NaH2 PO4 to about 1 mole Na2 CO3. Next, these two reaction mixtures are combined in a third vessel in such proportions that the molar ratio of Na2 HPO4 to NaH2 PO4 therein is in the range of about 1.6:1 to about 1.75:1; more preferably, from about 1.65:1 to about 1.7:1; most preferably at about 1.67:1. An aqueous solution containing Na2 HPO4 and NaH2 PO4 close to or at a molar ratio of about 1.67:1 will help to insure that the final STPP product contains a high percentage of STPP. These reactions and mixing are normally accomplished at relatively warm temperatures in the range of about 60° C. to about 100° C. to prevent crystallization and for ease of handling and with agitation in each mixing tank. Furthermore, it may be preferable, but not necessary, to remove any insoluble materials which are present in the reaction mixture after the wet process acid and Na2 CO3 are combined.
The aqueous feedstock solution prepared by this first step normally contains about 20% to about 36% by weight Na2 HPO4 and about 7% to about 15% by weight NaH2 PO4. The total P2 O5 content of this feedstock solution may range from about 15% to about 30% by weight, preferably from about 17% to about 27% by weight, of the solution. The pH of this solution is normally in the range of from about 6.0 to about 7.5, more preferably about 6.5 to 7.0.
The second and most important step of the present invention is the addition of a fluoride compound to this aqueous solution containing NaH2 PO4 and Na2 HPO4. The fluoride compound added to the reaction mixture must be capable of aiding in the precipitation of the magnesium and in the volatilization of the silicon. It has been found that NaF, HF and Na2 SiF6 accomplish these functions. Also, suitable other fluoride compounds such as sodium bifluoride (NaF.HF) and the like would also accomplish these desired functions. It is preferred that the cation of the fluoride compound be preferably sodium or hydrogen in order to be compatible with the sodium cations already present in the aqueous solution. NaF is the preferred fluoride compound to be added because HF is more costly and harder to handle in commercial applications and Na2 SiF6 adds silicon along with fluoride.
The exact manner of addition is not important to the invention. Preferably, the fluoride compound can be added to the third reaction tank, noted above, after the NaH2 PO4 and Na2 HPO4 solutions have been combined in the preferred ratio. While it is not known exactly how the fluoride compound acts in the reaction mixture, it is believed that it reacts with the silicon and magnesium present therein as to cause the magnesium to precipitate more easily and to make the silicon to become more volatile. Possible reactions between these elements are illustrated in equations (C) and (D), below, when NaF is the fluoride compound and Mg and Si are present in the form of MgO and SiO2 impurities:
2NaF+MgO+H.sub.2 O&#;MgF.sub.2 &#;+2NaOH (C)
4NaF+SiO.sub.2 +2H.sub.2 O&#;SiF.sub.4 &#;+4NaOH (D)
It is believed that the addition of fluoride compounds to this reaction mixture and the beneficial results occurring therefrom are quite surprising and unexpected. First, people skilled in the phosphoric acid and phosphate art have always been trying to remove fluoride from the products. Secondly, because the pH of this reaction mixture is above 6, it is surprising that SiF4 would be volatilized.
The amount of fluoride compound added to the reaction mixture containing NaH2 PO4 and Na2 HPO4 has been found to be critical to the present invention. Specifically, it has been found that sufficient fluoride must be added to the reaction mixture so that the F:(Si+Mg) molar ratio in the resulting solution is at least about 5:1, more preferably in the range of about 6:1 to about 20:1, most preferably in the range of about 7:1 to about 12:1. It has been found that the addition of too little fluoride may actually cause the silicon impurities to remain in the STPP product. See the Comparison Examples and Table IV. However, the addition of too much fluoride may have the disadvantageous result of an STPP product that is low in magnesium and silicon impurities, but high in fluoride. Thus, it is preferred to limit the amount of fluoride to prevent the formation of STPP product from having too much fluoride. However, it is believed that most of the fluoride compound will volatilize as HF or SiF4 during the heating step discussed below.
If the fluoride compound contains a sodium cation (e.g., NaF), then it is preferable to add additional amounts of NaH2 PO4 in order to readjust the Na:P ratio in the reaction mixture to about 5:3 or close thereto. The monosodium phosphate may be added either simultaneously with the sodium fluoride, or either before or after the addition of the fluoride compound. The adjustment of Na:P molar ratio will help to insure that the % STPP in the product remains high. See the Examples 6-10 below as showing this preferred procedure.
After addition of the fluoride compound, the magnesium impurities are allowed to precipitate in the reaction mixture. The time necessary for this precipitation should be sufficient to allow a major portion (i.e., at least about 50% by weight) of the magnesium to precipitate. Preferably, the reaction mixture is heated at reflux temperatures of about 100° C. to about 120° C. for about 0.5 to about 5 hours; more preferably from about 1 to about 3 hours. It has been found that magnesium impurities in STPP have an unusual inverse solubility characteristic in that they are more insoluble at higher temperature. Under the above preferred temperature conditions, a major portion of the magnesium is easily precipitated.
When it is believed that sufficient magnesium, along with other insoluble impurities, has precipitated from the solution, then it is separated from the aqueous solution by any conventional means. Normally, filtration is the preferred method for separation; although centrifugation and decantation are other possible methods. After this separation step, a clarified aqueous solution of Na2 HPO4 and NaH2 PO4 is left which also contains dissolved silicon and fluoride impurities. The removed magnesium impurities may normally be discarded.
Next, this clarified aqueous solution is heated by any conventional methods at temperatures in the range of about 400° C. to about 700° C., more preferably from about 500° C. to about 550° C. The clarified solution is preferably sprayed into a calcinating furnace for a sufficient amount of time whereby two functions occur. The first function is that a major portion (i.e., at least about 50% by weight) of the combined sum of silicon and fluoride present in the clarified solution is volatilized from the solution. As stated above, the silicon is believed to be volatilized in the form of SiF4 and any more excess fluoride is removed as HF gas. The second function that must occur during this step is that substantially all (i.e., at least about 95% by weight) of the water in the solution must also be volatilized while the Na2 HPO4 and NaH2 PO4 react to make a solid STPP product. This reaction is illustrated by the following equation (E):
2Na.sub.2 HPO.sub.4 +NaH.sub.2 PO.sub.4 &#;Na.sub.5 P.sub.3 O.sub.10 +2H.sub.2 O (E)
At the reaction temperature ranges recited above, the time sufficient to cause these two results to occur is from about 1 hour to about 5 hours; more preferably from about 2 hours to about 4 hours.
In a preferred operation of the present invention, the clarified solution, after the magnesium has been precipitated and separated, is first concentrated by boiling to remove a portion of the water preferably followed by centrifugation or equivalent means to separate any solids formed by the concentration at the reflux temperature of the solution. Usually, this concentration step increases the P2 O5 percent of the solution about 15-20% to about 25-30%. Next, this concentrated clarified solution is sprayed to any conventional calcinating furnace operating at the recited elevated temperatures. Such furnaces may contain crushing means or the like to make entrapped silicon and fluoride in the STPP product more susceptible to volatilization.
After the heating step, the resulting STPP product is recovered by any conventional means. Regularly, the product is immediately cooled by an air cooling or quenching step or the like. After the cooling step, the STPP product is ready to use. It may be either stored, packaged or immediately used for other applications. This product is normally a white crystalline solid having a pH of about 9.
Because of the improved process of the present invention, the product may be dissolved in water without producing a turbid or cloudy solution. Such clear aqueous solutions of STPP are very desirable in many applications including foods, household products, industrial cleaning, pulp and paper, textile processing, pharmaceuticals and the like.
The following examples further illustrate the present invention. All parts and percentages are by weight unless explicitly stated otherwise.
EXAMPLE 1 Comparison of Turbidity of STPP SolutionsA commercial STPP product made by the wet process was compared to two (2) commercial STPP products produced by two different furnace processes. All three products were dissolved in distilled water to produce 10% by weight STPP solutions. These three solutions were stirred for about one hour to insure complete dissolution of the STPP. Then, the turbidity of each solution was measured on a Klett-Summerson Colorimeter, Model , by the standard method recommended by the instrument manufacturer, employing a red filter. Turbidity was measured as being the insoluble matter present in a specific amount of STPP. On the Klett-Summerson Colorimeter, distilled water alone has a turbidity value of zero and is clear by visual appearance. The results of this comparison are given in Table I.
TABLE I
______________________________________
Klett-Summerson
Visual
STPP Source Turbidity Number
Appearance
______________________________________
Wet Process 55 Turbid
Furnace Process (A)
7 Clear
Furnace Process (B)
5 Clear
______________________________________
These results show that the furnace process STPP products are less turbid in aqueous solutions than STPP produced by the wet-process.
Analysis of these wet process and furnace process STPP products by conventional methods showed that wet process STPP contains much higher concentrations of magnesium, silicon and fluoride (and total insoluble matter) than furnace process STPP. The specific analysis of these STPP products are shown in Table II, below.
In particular, the concentrations of magnesium, silicon and fluoride were measured when the STPP was in dry powder form. The measurement of total insoluble matter was accomplished by making a 10% by weight solution of STPP with distilled water, separating out the insoluble matter by filtration, then drying and weighing this insoluble matter.
TABLE III
______________________________________
Impurities
in STPP (ppm)
Insoluble
STPP Source MG Si F Matter (ppm)
______________________________________
Wet Process 449 618 57
Furnace Process (A)
13 <10 4.6 95
Furnace Process (B)
17 <5 <5 45
______________________________________
The data in Table II shows that wet process STPP contains higher concentrations of the impurity elements: magnesium, silicon and fluoride; as compared to the two furnace process STPP products. The presence of these impurities in wet process STPP is further indicated in the high concentrations of insoluble matter ppm as compared to 95 and 45 ppm in two furnace process STPP products. Still further, the results of Table I and Table II, taken together, show that silicon and magnesium impurities in STPP made from wet process acid are a significant portion of the insoluble matter and, thus, their presence are major factors regarding the turbidity characteristics of STPP solutions.
EXAMPLE 2A 200 gram sample of wet process phosphate feedstock that is used to make STPP was charged into a 500 milliliter stainless steel reactor equipped with a stirrer, thermometer, condenser and heating mantle. This feedstock was composed of a blend of monosodium phosphate (NaH2 PO4) and disodium phosphate (Na2 HPO4) in a ratio of 2 moles of the latter to 1 mole of the former. Thus, the sodium to phosphate molar ratio was 1.67:1. This feedstock contained 23.6% by weight Na2 HPO4 and 9.98% by weight NaH2 PO4 (whose combined total was equivalent to 17.7% by weight P2 O5). The feedstock also contained 300 ppm magnesium, 217 ppm silicon and 68 ppm fluoride. Next 0.938 grams of NaF was added to the reactor. The resulting molar ratio of F:(Si+Mg) was calculated to be 5.7:1. This mixture was refluxed for 2 hours at 104° C. The mixture was then filtered to remove precipitated magnesium impurities. The filtrate was then evaporated to near dryness on a rotary flask evaporator. This concentrated filtrate was placed in a platinum crucible at 540° C. for one hour, then cooled, pulverized in a Waring blender, and reheated for 1 hour at 540° C.
The recovered STPP was pulverized and analyzed for magnesium, silicon and fluoride by standard analytical methods. The Klett-Summerson turbidity readings of a 10% aqueous STPP solution and the analysis for % STPP in the product were also determined. These results are listed in Table III, below.
EXAMPLE 3The procedure of Example 2 was repeated except 1.250 grams of NaF were added to the reactor. The results of this Example are given in Table III.
EXAMPLE 4The procedure of Example 3 was repeated with 1.250 grams of NaF added. The results of this Example are also given in Table III. Examples 3 and 4 taken together show reproducibility of the present invention.
EXAMPLE 5The procedure of Example 2 was repeated except 2.500 grams of NaF were added to the reactor. The results of this experiment are given in Table III.
Comparing the results of Examples 2-5 shows that increasing amounts of NaF added causes less amounts of Si to be left in the STPP product. Moreover, the STPP products of these Examples 2-4 all showed acceptable Klett-Summerson readings for turbidity. Slightly clearer solutions of STPP were formed as the Si levels are reduced by larger NaF added amounts.
EXAMPLES 6-10The procedure of Example 2 was repeated except 1.5 grams of NaF and 7.4 grams of monosodium phosphate (NaH2 PO4.H2 O) were added to the reaction mixture. The NaH2 PO4.H2 O was added to maintain the molar ratio of Na:P in the STPP product at 1.67:1. The results of these examples are also shown in Table III.
Comparing the results of Examples 6-10 with those of Examples 2-5 shows that the % STPP in the product is increased significantly through the addition of NaH2 PO4.H2 O to the reaction mixture. The results of Examples 6-10 also show the good reproducibility of the present invention in obtaining low levels of silicon and magnesium impurities, and thus, low turbidity in aqueous STPP solutions. It can be observed that fluoride levels do not contribute significantly to turbidity.
TABLE III
__________________________________________________________________________
Resulting Turbidity
NaF added F:(Si + Mg)
NaH.sub.2 PO.sub.4 . H.sub.2 O
STPP Analysis Klett-Summerson
Example
grams ratio added, grams
% STPP
Mg, ppm
Si, ppm
F, ppm
Reading
__________________________________________________________________________
2 0.938 5.7:1 0.0 96 15 139 50 9
3 1.250 7.6:1 0.0 -- 15 151 23 12
4 1.250 7.6:1 0.0 84.1 12 72 24 7
5 2.500 15.0:1 0.0 75.2 28 50 245 1
6 1.500 9.1:1 7.4 97.5 16 90 245 6
7 1.500 9.1:1 7.4 97.5 11 83 110 4
8 1.500 9.1:1 7.4 98.5 12 64 140 4
9 1.500 9.1:1 7.4 98.5 10 49 36 2
10 1.500 9.1:1 7.4 98.1 13 76 23 1
__________________________________________________________________________
EXAMPLE 11
The procedure of Example 2 was repeated except 3.6 grams of Na2 SiF6 was added to the reactor instead of NaF. Furthermore, 7.4 grams of NaH2 PO4.H2 O were added to the mixture. The resulting molar ratio F:(Si+Mg) of the reaction mixture was calculated to be 4.9:1. The % STPP in the product was found to be 93.7% by weight. The STPP product was found to contain 5 ppm Mg, 65 ppm Si and 307 ppm F. A 10% aqueous STPP solution had a Klett-Summerson turbidity reading of 1.
EXAMPLE 12A wet process phosphate feedstock similar to that employed in Examples 2-11 was employed except that feedstock contained 619 ppm Mg, 116 ppm Si and 114 ppm F. 2.5 grams of 48% hydrofluoric acid (HF) were added to this feedstock. The resulting molar ratio of F:(Si+Mg) in the feedstock was 10.3:1. The procedure of Example 2 was then repeated. The resulting STPP product was found to contain 20 ppm Mg, and 124 ppm Si. A 10% aqueous STPP solution had a Klett-Summerson turbidity reading of 6.
Examples 11 and 12 show that other fluoride compounds besides NaF are effective for reducing the levels of Mg and Si impurities.
COMPARISONS 1-4The procedure of Example 2 was repeated except that either no NaF was added to the reactor or very small amounts of NaF were added. In these comparisons, the resulting molar ratio F:(Si+Mg) in the reaction mixture was less than about 5:1 and the amounts of Si and Mg impurities were of unacceptable levels. Aqueous solutions containing 10% STPP had high Klett-Summerson readings which indicated turbidity in the solution. The results of these Comparisons are given in Table IV, below.
If you want to learn more, please visit our website cas no .
TABLE IV
__________________________________________________________________________
Resulting Turbidity
NaF added
F:(Si + Mg)
NaH.sub.2 PO.sub.4 . H.sub.2 O
STPP Analysis Klett-Summerson
Comparison
grams ratio added, grams
% STPP Mg, ppm
Si, ppm
F, ppm
Reading
__________________________________________________________________________
1 0.000 0.2:1 0.0 96 956 525 4 25
2 0.313 2.0:1 0.0 -- 53 514 7 39
3 0.506 3.1:1 0.0 93.4 28 482 22 31
4 0.625 3.9:1 0.0 -- 25 494 7 36
__________________________________________________________________________
RDP or not to RDP? Choosing the Best Plaster Additive
10 Questions You Should to Know about Magnesium Sulfate for Mineral Water
10 Questions You Should Know about Resin Selection for Epoxy Flooring Installers
Exploring Symmetric Dimethylurea Raw Materials Today
How Does Ordinary Steel Reinforce Concrete Work?
How Does Cryotherapy Revolutionize Full Body Wellness?
The Advantages of Choosing Haoze
44
0
0
Related Articles
Comments
All Comments (0)