Key Questions to Ask When Ordering xps foam board extrusion line

If you are looking for more details, kindly visit our website.

What are the remarkable characteristics of Feininger 2 Inch XPS Foam Board?

High compression strength (100-1000KPA).

Excellent thermal insulation and long-lasting (thermal conductivity up to 0.028W/ M. K).

Hydrophobic and moistureproof (water absorption < 1%).

Good dimensional stability and weather resistance (life span 30-50 years)

What are the factors related to the thermal conductivity of 2 Inch XPS Foam Board?

There are four factors related to the thermal conductivity of the bubble wall, the thermal conductivity of the gas in the bubble, the radiation delivery rate of the bubble wall and the bubble, and the convective thermal conductivity of the gas in the bubble.

The second factor accounts for the largest proportion, about 60%.

What is the closed-cell rate of a good 2 Inch XPS Foam Board?

More than 99%, 80% closed cell rate of foamed polyurethane (thermal insulation material).

What is the apparent density of 2 Inch XPS Foam Board (usually referred to as density)?

Floor heating varies according to the scene of use, so the density requirements are different. The density of the extruded board for floor heating is generally about 35KG/m ³, the density of the extruded board for wall insulation is about 25KG/m ³, and the density of the extruded board for filling is about 45KG/m ³.

How good is the heat preservation effect?

2cm extruded foam board can be equivalent to 100cm concrete and 120cm cement perlite.

What is the compressive strength of 2 Inch XPS Foam Board?

The compressive strength of the extruded board is proportional to the density, and the greater the density, the greater the compressive strength.

It can be controlled at 100-1000KPA according to the density and other parameters. High-quality raw materials of the extruded board 35KG/m ³, compression can achieve 250-300KPA. Due to the process, the compression strength of the extruded board is very low when it is just off the line.  With the increase of time, aging will increase the compressive strength, and then tend to stabilize, generally checked after 45 days of storage.

What is the water absorption of the extruded board?

The water absorption is less than 1.5% and the moisture permeability is less than 3.5Ng/ (m.sPa), which makes the extruded board difficult to decompose and mildew.

What's the relationship between the density and the compressive strength of 2 Inch XPS Foam Board?

When other conditions are the same, the density is proportional to the compression in a certain range.

The flammability of the 2 Inch XPS Foam Board?

Different standards have different classification methods, the common combustion properties of extruded boards are B1, B2, B3, B1 is non-flammable (oxygen index is more than 30%), B2 is flammable (oxygen index is more than 26%), B3 is flammable.

How is the environmental protection of the 2 Inch XPS Foam Board?

The environmental protection of extruded board depends on raw materials and flame retardants. Recycled raw materials are easy to contain free benzene, styrene, TVOC and other harmful substances, flame retardant HBCD is not environmentally friendly.

What is the "ripening" of extruded panels?

The long-term thermal resistance of extruded panels, like other polymer foaming materials, will also change over time, a phenomenon known as "ripening".

What are the specifications of the extruded board?

Specifications for floor heating: 1670*600*20mm, 1670*600*30mm, etc.

Specifications for building thermal insulation: 2000*600*200mm, 2000*600*30mm, etc.

Why is the width of the extruded board basically 600mm?

Because the extruding board is continuously extruded, the length can be customized, and the width can only be 600mm before, but now the technological progress can do 1200mm. As for the thinnest 10mm, the thickness can be as thick as 100mm.

What is the dimensional stability of the extruded board?

The dimensional stability of the extruded plate is very good at high temperature (70 ℃) and low temperature (- 20 ℃), which can be controlled within 1%.

wuxing Product Page

Experimental requirements for freeze-thaw cycle of extruded panels?

The indicators are: after 300 freeze-thaw cycles, the compressive strength of the extruded board is reduced by no more than 10% of the initial value, the long-term water absorption rate for building insulation is not more than 2%, and the long-term water absorption rate for civil engineering is not more than 5%.

What are the physical, mechanical, thermal and flammable properties of the extruded board?

•  Physical properties: apparent density, true density, dimensional stability, water absorption, water vapor permeability, freeze-thaw cycle.

• Mechanical properties: compression, bending, shear strength, compressive creep, tensile strength.

• Thermal properties: thermal conductivity, thermal resistance, long-term thermal resistance.

What are the factors related to the thermal conductivity of the extruded board?

Raw material properties and production process: uniform cell, small gap and good performance of foaming agent are beneficial to reduce thermal conductivity.

apparent density: the thermal conductivity of density is inversely proportional to a certain range, and is proportional to a certain range after reaching the optimum density.

Table of Contents:

1. High molecular polymer foam materials

2. The common sense of extruded board 

3. The performance characteristics of the extruded board

4. Production and technology of extruded board

5. The use and construction of the extruded board

6. Other related information of extruded board

Chapter Three Performance characteristics of extruded board

1. What are the notable characteristics of the extruded board?

High compressive strength (compressive resistance 100-1000KPA)

Excellent thermal insulation performance and long-lasting (thermal conductivity up to 0.028W/M·K)

Hydrophobic and moisture-proof (water absorption rate <1%)

Good dimensional stability, weather resistance (30-50 years of life)

2. What factors are related to the thermal conductivity of the extruded board?

The thermal conductivity of the cell wall, the thermal conductivity of the gas in the bubble, the radiation penetration rate of the cell wall and the bubble, and the convective thermal conductivity of the gas in the bubble. The second factor accounts for the largest proportion, about 60%.

3. What is the closed-cell rate of a good extruded board?

Over 99%, the closed-cell ratio of foamed polyurethane (insulation material) is 80%.

4. What apparent density (usually referred to as density) of the extruded board?

Floor heating varies according to the usage scenarios, so the density requirements are different. The density of extruded board for floor heating is generally about 35KG/m³, the density of extruded board for wall insulation is about 25KG/m³, and the density of extruded board for filling is about 45KG/m³.

5. How good is the insulation effect?

2cm extruded board can be equivalent to 100cm concrete and 120cm cement perlite.

6. What is the compressive strength of the extruded board?

The compressive strength of the extruded board is directly proportional to the density, the greater the density, the greater the compressive strength. According to different parameters such as density, it can be controlled at 100-1000KPA. The extruded board made of high-quality raw materials is 35KG/m³, and its compression resistance can be 250-300KPA.

Due to the process, the compression strength of the extruded board is very low when it is just off the assembly line. As time increases, aging will increase the compressive strength, and then it will become stable. The general inspection is after 45 days of storage.

7. What is the water absorption rate of the extruded board?

The water absorption rate is ≤1.5%v/v, and the moisture permeability coefficient is ≤3.5Ng/(m.sPa), which makes the extruded board difficult to decompose and mildew.

8. What is the relationship between the density and compressive strength of the extruded board?

Under the same other conditions, the density within a certain range is proportional to the compressive strength.

9. What is the combustion performance of the extruded board?

Different standards have different classification methods, and the commonly used combustion properties of extruded boards are divided into B1, B2, and B3. B1 is non-flammable (oxygen index greater than 30%), B2 is flammable (oxygen index greater than 26%), and B3 is flammable.

10. How about the environmental protection of the extruded board?

The environmental protection of extruded boards depends on the raw materials and flame retardants. The recycled raw materials easily contain harmful substances such as free benzene, styrene, TVOC, etc., and the flame retardant HBCD is not environmentally friendly.

11. What is the "curing" of the extruded board?

The long-term thermal resistance value of the extruded board, like other polymer foam materials, will also change over time. This phenomenon is called "curing".

12. What are the specifications of the extruded board?

Floor heating specifications: 1670*600*20mm, 1670*600*30mm, etc.

Specification for building insulation: 2000*600*200mm, 2000*600*30mm, etc.

13. Why is the width of the extruded board is basically 600mm?

Because the extruded board is continuously extruded, the length can be customized, and the width can only be 600mm before, but now it can be 1200mm with technological advancement. As for the thickness of the thinnest 10mm, the thickness can be up to 100mm.

14. How about the dimensional stability of the extruded board?

The dimensional stability of the extruded board at high temperature (70℃) and low temperature (-20℃) is very good, and it can be controlled within 1%.

15. What are the requirements for the freeze-thaw cycle experiment of the extruded board?

The indicators are: after 300 freeze-thaw cycles, the compressive strength of the extruded board will not exceed 10% of the initial value; the long-term water absorption rate for building insulation does not exceed 2%; the long-term water absorption rate for civil engineering does not exceed 5%.

16. What are the physical properties, mechanical properties, thermal properties, and combustion properties of the extruded board?

Physical properties: apparent density, true density, dimensional stability, water absorption, water vapor transmission coefficient, freeze-thaw cycle;

Mechanical properties: compression performance, bending performance, shear strength, compression creep, tensile strength;

Thermal performance: thermal conductivity, thermal resistance, long-term thermal resistance;

Combustion performance: limit oxygen index, combustion performance classification, smoke density.

17. What factors are related to the thermal conductivity of the extruded board?

Raw material properties and production process: uniform cells, small gaps, and good foaming agent performance are beneficial to reduce thermal conductivity.

Apparent density: The thermal conductivity of density in a certain range is inversely proportional, and after reaching the optimal density, it is proportional to a certain range.

Cell size: When the apparent density is the same, the smaller the cell size, the smaller the thermal conductivity.

Placement time: The thermal conductivity of the extruded board increases rapidly within 30 days after it is off-line, and stabilizes after 90 days.

Humidity: Thermal conductivity increases after XPS absorbs water.

Temperature: Due to the influence of radiation heat transfer, the thermal conductivity increases with increasing temperature.

Feininger is the first professional manufacturer of XPS Extrusion Line and XPS Foam Board in China. At the same time we are the unique enterprise specializing in XPS Foam as well as developing, manufacturing and selling of XPS extrusion line. We also manufacturing ETPU extrusion line, PET production line, EPS production line, recycling and pelletizing machine, etc. Contact us for more details.

Are you interested in learning more about xps foam board extrusion line? Contact us today to secure an expert consultation!