The basics of eye and face protection for welders

To ensure workplace health and safety, both employees and employers need to recognize hazards and prevent accidents. This is especially true for those who work in welding. Welders face a range of work-related hazards daily, from dangerous fumes to burns from harmful bright light or molten metals.

For more welding safety gogglesinformation, please contact us. We will provide professional answers.

One way to keep welders safe is the proper use of personal protective equipment (PPE). All welders and their employers should know the best safety practices related to eye and face protection for welding.

The Basics of PPE

Generally, PPE is any type of clothing or equipment designed to protect a worker from potential hazards in the workplace. While PPE alone cannot eliminate all potential risks in the workplace, following the recommended PPE guidelines and procedures furnished by employers and regulatory agencies can reduce risk and prevent injury and incidents.

To be effective, PPE must be free from defects, fit well, and provide the required level of protection. Workers should feel free to ask their supervisors or safety professionals when they have questions concerning the fit or use of PPE.

PPE comes in many forms, including protective footwear, pants, gloves, coats and jackets, and respirators. Welders should be aware of available PPE and routinely wear safety gloves, fire-resistant clothing, safety shoes, and eye and face protection.

Face and Eye Protection: Best Safety Practices

Standard welding PPE includes welding helmets, face shields, goggles, and safety glasses with side shields. All these are used to protect the welder's eyes and face from the high-intensity light, sparks, and spatter produced by most welding operations.

It's important for welders to inspect their eye protection before each use. They should replace lenses that are too scratched to see through. Safety glasses with cracked or pitted lenses may shatter easily. They also should replace goggle straps that are knotted, twisted, or stretched out.

Because they are considered secondary forms of eye protection, face shields and welding helmets must be worn with goggles or safety glasses with side shields. One form of eye protection is not enough. If a welder doesn't use safety glasses with side shields, a flash burn from the ultraviolet rays can result.

Goggles should be vented to reduce fogging of the lenses as much as possible. Specially designed chemical goggles are the best choice for welders if dust, fumes, mists, gases, or vapors are present.

On most protective eyewear, filtered plates keep out harmful radiation such as ultraviolet or infrared light that can burn the eyes and lead to blindness. It's important to choose the correct filter shade to regulate the amount and type of light that reaches the eye. As a rule of thumb, the welder should start with a shade that is too dark to see the welding zone and then gradually find a lighter shade that gives a sufficient view of the weld zone without going below the minimum shade number required for the task at hand.

The company is the world’s best china safety products supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

These filter plates are numbered, with a higher number indicating the filter plate is darker, and thus able to filter out more visible light. These numbers are additive; for example, a welder using a No. 10 filter plate in a welding helmet and No. 4 filter lenses in goggles or safety glasses will have protection equivalent to a No. 14 filter plate. A lens shade selector chart (F2.2-89R), available from the American Welding Society (AWS), can help welders select the proper filter shade for a given application.

Safety glasses must fit well to be effective. They should be snug on the bridge of the nose, with the temples adjusted to keep the center of the lens in front of the eye. The straps of safety goggles should fit snug and low on the back of the head.

Welders who wear prescription eyewear can use either prescription safety glasses or safety goggles over their prescription glasses, although welders working around high-voltage electricity should not use any type of metal eyewear. Contact lenses are discouraged in dusty areas or where certain types of chemicals are present.

After use, eye and face protective equipment should be wiped clean of dust and dirt. Some lens-cleaning solutions are designed not to damage special coatings. Clean eyewear should be stored in a closed container, protected from dust, moisture, direct sunlight, heat, and other elements that may reduce its effectiveness.

PPE Essential to the Job

Proper selection and use of PPE can mean the difference between a job done safely and a tragic accident. Welding jobs contain many unique hazards, many of which can be guarded against with the right PPE.

Welders are not the only workers who should be concerned about PPE. Other people in the welding area must also be protected from potentially hazardous light, sparks, and spatter. Everyone in the area should use eye and face protection, or flameproof screens must be in place. Welders must know how to select, use, and care for PPE correctly. The proper selection and use of PPE are as integral a part of a welder's job as a clean weld.

Chris Van Hoven is a producer with Summit Training Source® Inc., 2660 Horizon Drive S.E., Grand Rapids, MI 49546, phone 800-842-0466, fax 616-949-5684, e-mail chrisv@safetyontheweb.com, Web site www.safetyontheweb.com. Summit Training Source Inc. provides environmental, health, and safety training programs in multiple formats.

Quite the opposite - it is GOOD to wear your safety glasses all day. You've only got 2 eyes, so safety glasses are very important.

The myth about wearing safety glasses all day being bad for you comes from poor fitting, uncomfortable, and badly maintained glasses being worn. Worn for long periods, these glasses can cause headaches, eye strain, soreness on the bridge of the nose, and pain around the ears....no wonder workers would avoid wearing them!

Another common misconception is that the lens in safety glasses provide a distorted view, and wearing them for long periods leads to eye strain and headaches. While this may be true for some safety glasses, well designed glasses that are certified to AS/NZ 1337.1.2010 standards will have very little distortion (any lens will have some distortion due to the curve) and should not cause eye strain or headaches from long term wear.

So to sum up, wearing safety glasses (or alternative eye protection) all day is VERY IMPORTANT, and you should find a pair of safety glasses that will provide you with the correct fit and comfort to do so. For safety glasses designed specifically for NZ engineers, we'd recommend the CRAFTSMAN 505's - click here to learn why.

If you are looking for more details, kindly visit wholesale raincoats.