10 Things You Need to Know About Constant Tension Hose Clamps

How to Use Constant Tension Hose Clamps: Step-by-Step Guide.

Constant Tension Hose Clamps are essential for keeping hoses secure and leak-free. Here’s a step-by-step guide on how to use these clamps effectively:

Step 1: Choose the Correct Size Clamp.

Before using a Constant Tension Hose Clamp, ensure the clamp’s size matches the diameter of the hose you want to secure. Use a measuring tape to measure the outer diameter of the hose and choose the correct clamp size accordingly.

Step 2: Prepare Your Hose.

Make sure the end of the hose is clean and free from dust, grease, and debris. This will ensure the clamp’s teeth grip the surface of the hose effectively.

Step 3: Open the Clamp.

Using a set of pliers or your fingers, open the clamp’s jaws until they are wide enough to accommodate the hose.

Step 4: Place the Clamp on the Hose.

Slide the clamp over the end of the hose, making sure it is positioned in the desired location.

Step 5: Tighten the Clamp.

Using pliers, push down on the clamp’s handle until the teeth dig into the hose, securing it in place. Do not over-tighten the clamp, as this can damage the hose.

Step 6: Check for Leaks.

After installing the clamp, turn on the system and check for any leaks. If there are any, adjust the clamp’s position or tighten it as necessary.

Step 7: Remove the Clamp.

To remove the clamp, use pliers to squeeze the handles together and release the jaws. Slide the clamp off the hose.

Some additional tips to keep in mind:

- Constant Tension Hose Clamps are designed to be reusable, so don’t discard them after one use.

- For best results, install the clamp close to the end of the hose and centered on the fitting.

- Don’t use hose clamps that are too small for the hose as this can cause leaks.

If you want to learn more, please visit our website constant tension hose clamps, adss tension clamp wholesaler, adss tension clamp.