Aluminum Sliding Patio Door Costs

Doors that are exterior facing must close against weather and intrusion. A common choice for sliding patio door frame material is aluminum.

Tianjin Frame Metal contains other products and information you need, so please check it out.

You will find that the cost to install average aluminum sliding patio doors depends upon material and finish grade, size, structural preparation and special needs, and the labor rate.

In the following table the Labor Cost figure is what the able and prepared DIY persons should expect to save by performing the corresponding tasks.

Sliding patio door replacement: remove and dispose of existing door, install new door; include all material, equipment, and waste.

Item Unit Cost Quantity Line Cost Aluminum frame: 6' wide x 6'8" tall, 2 sliders, single-glazed, bronze finish; prehung, includes patio lock, trim, hardware, and touch-up. $629 each 1 $629 Upgrade: additional cost for double-glazed glass and mill finish aluminum. $220 each 1 $220 Remove and dispose: existing door; include transport and non-hazardous dump fees. $45 per CY 1 $45 Material Cost $894 each 1 $894 + Labor Cost (remove) $32 per hour 3 $96 + Labor Cost (replace) $38 per hour 5 $190 Total Cost $1,180 each 1 $1,180

Other considerations and costs

• These prices are for service in the immediate area of the provider.
• Taxes and permit fees are not included.
• Exterior patio doors bear critical responsibility for weather sealing and security.
• During contractor inspection the homeowner should be informed of any repair concerns like rot, and the cost to adapt the existing door-opening structure.
• A project to replace more than 2 doors should enjoy a unit price discount.
• There may be local or national subsidy for energy efficiency improvements.

DIY considerations

• This project may suitable for DIY with carpentry skills, unless of a critical closure deadline.
• Partial DIY of removal and disposal tasks are possible for the prepared DIY.

References

• Craftsman Estimator Costbook, complete series year .
• Latest prices found on Home Depot and other vendor Web sites.
• Literature review of DIY Web sites.

As stated earlier, there are several factors that are going to influence how much you will end up paying for the installation of a sliding door. It is important for you to be aware of these factors so that you budget accordingly. Kukun details some of the most important factors for cost when installing a sliding door.

The door frame material

There are three popular door frame materials that homeowners can choose from. Each one of these materials vary in cost and will the influence the price of your installation.

Wood is a great option for those looking for aesthetics and top-tier insulation. You can match the wood color to the interior décor of your room. However, it is important to mention that wooden frames need to be treated to keep the rot and insects away. According to Fixr, the average price of installing a sliding door with a wooden frame is about $500 to $1,500 exclusive of the installation labor cost.

Vinyl is a popular option for most homeowners because it is easy to maintain, durable, and less expensive. The only problem with vinyl is that it is not as airtight as other frame materials. The buying price of a sliding vinyl door ranges between $300 and $700.

Additional reading:
Essential Guide to Cryo Pipe Support: Tips & Solutions
How Does Minimalist Home Office Setup Boost Productivity?
Everything You Need to Know About Ziheng Seamless Steel Pipes
Transform Your Space with Backlit Resin Panels
How to Choose Cardboard Baler Wire Ties?
How to Choose the Right Translucent Board Lampshade?
How to Choose the Right Ziheng Seamless Steel Pipes?

For more information, please visit Aluminum Sliding Patio Doors.

Aluminum frames are another popular option because they are strong and lightweight. The cost of an aluminum sliding door is approximately $600 to $1,000. Aluminum as a material is subject to heat loss, so it is best for homes in regions with more mild temperatures.

The number of panels

On top of choosing frame material, you must also choose the number of panels for your sliding door. The number of glass panels will determine the overall scope of work and the amount of material needed.

Fixr explains that there are five common options that homeowners have when deciding the number of panels: two-panel, three-panel, four-panel, five-panel, and six-panel doors. The two-panel option is the least expensive and most common. Depending on the number of panels you want, it will cost you between $400-$6,500.

Model and manufacturer

Manufacturers price their products differently depending on the method of production and the materials used. So, it goes without saying that the company you buy from will determine how much you end up paying for the door. You should also realize that a sliding door should be a long-term investment, and a replacement in the event of damage can be quite costly. It is vital that you choose a manufacturer with good warranty terms. A proper warranty should cover the door for 10 to 20 years. Remember, despite new technology, glass is still glass, and it's prone to scratches or even cracks. Because of this, it is best to consider getting a door that has some sort of warranty.

Labor fees

The amount of work necessary for every installation or replacement is different; simpler installations will cost you less than the complex ones that require more hours and equipment. Nonetheless, the average cost of installation is between $65 to $85 per hour. You may have to pay an extra $100 to $150 for the removal and disposal of the old door if it is a replacement.

For more Aluminum Alloy Swing Doorinformation, please contact us. We will provide professional answers.