How to Install Hollow Skirting Board Easily?

Installing hollow skirting boards can greatly enhance the look of your interior space. They are not only stylish but also practical, hiding wiring and providing protection to your walls. This guide will walk you through the installation process step-by-step.

## Materials and Tools Needed.

### Tools:

- Measuring tape.

- Miter saw.

- Pencil.

- Level.

- Nail gun (or hammer and finishing nails).

- Caulking gun.

- Utility knife.

- Safety glasses.

### Materials:

- Hollow skirting boards.

- Wood adhesive (optional).

- Caulk.

- Paint or wood finish (if not pre-finished).

## Step-by-Step Installation Process.

### Step 1: Measure the Area.

1. **Measure the Wall Lengths**: Use your measuring tape to determine the lengths of each wall where you will be installing the skirting board.

2. **Take Note of Corners**: Identify any corners or joints where pieces will need to be mitered. This is crucial for a clean finish.

### Step 2: Prepare the Boards.

1. **Mark the Cuts**: Based on your measurements, mark the points where you need to cut your skirting boards, ensuring you account for miter cuts where necessary.

2. **Make the Cuts**: Using the miter saw, carefully cut the skirting boards to length. For corners, set the saw to a 45-degree angle for a snug fit.

### Step 3: Dry Fit the Boards.

1. **Position the Boards**: Before attaching anything, hold the boards in place against the wall to check the fit.

2. **Adjust as Necessary**: Make any adjustments to ensure the boards align properly and fit well at the corners.

### Step 4: Attach the Skirting Boards.

1. **Apply Adhesive (Optional)**: If desired, apply wood adhesive to the back of the skirting boards for extra hold.

2. **Secure the Boards**: Using a nail gun (or hammer and finishing nails), attach the skirting boards to the wall, starting from one end and working toward the other. Ensure each board is level as you go.

### Step 5: Fill in the Gaps.

1. **Caulk the Edges**: After all the boards are attached, use a caulking gun to fill gaps between the wall and the skirting. This provides a clean, professional look.

2. **Fill Nail Holes**: Use wood filler to fill any visible nail holes. Allow it to dry according to the manufacturer's instructions.

### Step 6: Finishing Touches.

1. **Sand if Necessary**: Once the filler is dry, sand the areas smooth to ensure a seamless finish.

2. **Paint or Finish**: Apply paint or wood finish to match your decor. Let it dry fully before using the area.

## Conclusion.

Following these steps will allow you to install hollow skirting boards easily and effectively. This simple addition can significantly elevate your home’s aesthetic, providing both functionality and style. Enjoy your newly enhanced space!

Contact us to discuss your requirements of bespoke skirting boards, wholesale polyvinyl chloride flooring. Our experienced sales team can help you identify the options that best suit your needs.