How to Install Plastic Moulded Skirting Board.

How to Install Plastic Moulded Skirting Board.

Skirting boards, also known as baseboards, are an essential component of any building, providing a decorative and protective feature to the lower part of the walls. However, traditional skirting boards made of wood can be difficult to maintain, and some homeowners are looking for a more durable and low-maintenance option. This is where plastic moulded skirting boardplastic moulded skirting boards come in. Here is a step-by-step guide on how to install plastic moulded skirting board.

Measuring.

Before heading to the hardware store to buy the skirting boards, measure the length of each wall where you intend to install the skirting board. You will need to calculate the total linear footage of the skirting board required, so make sure your measurements are accurate. Add an extra 5% to the total length to allow for any cutting or trimming around corners that may be required.

Preparation.

To begin the installation process, clear the existing skirting board and debris from the wall area. Use a putty knife to remove any excess adhesive, and ensure that the surface is clean and dry before proceeding. If the wall is uneven, use filler to level it out.

Cutting and Joining.

Using a saw or mitre box, cut the skirting board to your required length. If the wall has inner or outer corners, you will need to cut the skirting board at a 45-degree angle to ensure a neat finish. Joining two pieces of skirting board together? Measure the angle required and mark the skirting board at the intersection point. Cut the two pieces to align and create the required angle for joining them together.

Installation.

Using a silicone adhesive or construction adhesive, apply the adhesive to the back of the skirting board and press it firmly against the wall, ensuring that it is level with the floor. For a neat finish, do not apply too much adhesive.

If there are uneven surfaces, use a caulking gun to apply the adhesive in the gaps between the skirting board and the wall. .

After applying the adhesive and aligning the skirting board, nail it to the wall using finishing nails or panel pins. Remember that plastic moulded skirting boards are prone to cracking if too much force is applied, so use a light touch when hammering in nails or pins.

Fill any gaps caused by uneven surfaces or the joining of skirting board pieces with silicone sealant.

Finishing Touches.

To complete the installation process, use a silicone sealant to fill any gaps along the top of the skirting board, where it meets the wall. This will prevent dirt, dust or debris from getting behind the skirting board. Once sealed, leave the adhesive and sealant to dry for 24 hours before decorating.

In conclusion, installing plastic moulded skirting board is relatively easy and can be performed by anyone with basic DIY skills. Proper planning, preparation, and careful application of adhesive and nails are essential to ensure a clean, professional-looking finish. If you need help or advice on how to install plastic moulded skirting board, get in touch with our experts today.

Contact Us.

If you have any questions or require further assistance with plastic moulded skirting board installation, please contact us. Our team of experts is always available to help you with your skirting board needs.

For more information, please visit Wholesale PVC Skirting Board Company, Wholesale PVC skirting Supplier.