Questions You Should Know about Industrial Power Systems Equipment Supplier

Industrial power supplies are critical components in various industries, ensuring that machinery and equipment run smoothly. Without them, factories, manufacturing plants, and other industrial settings could experience downtime, inefficiencies, or even damage to valuable equipment. In this blog post, we’ll break down everything you need to know about industrial power supplies, what components they consist of, and why they are essential for your business.

Please visit our website for more information on this topic.

What Is an Industrial Power Supply?

An industrial power supply is a system that provides reliable and consistent electricity to industrial equipment. Its main job is to convert and regulate the incoming power to ensure it meets the specific needs of machinery, no matter how big or small. In simple terms, an industrial power supply takes the electricity from your wall outlet (which is AC power) and converts it into the kind of power that industrial machines need (which is often DC power). Think of it like a translator, making sure the electricity “speaks” the right language for your equipment. But they do more than just translate. Industrial power supplies also act as bodyguards, protecting expensive equipment from power surges, spikes, and other electrical hiccups that can cause damage or downtime.

Types of Industrial Power Supplies

Just like there are different types of tools for different jobs, there are different types of industrial power supplies. Here are the main ones:

• Linear Power Supplies: these are like the old reliable workhorses. They’re simple, sturdy, and great for things that need a super stable power supply, like lab equipment.
• Switching Power Supplies: these are more modern and efficient. They’re smaller, lighter, and can handle a wider range of situations, making them perfect for most industrial applications.
• Programmable Power Supplies: these are the brainy ones. They can be customized to provide exactly the right kind of power for specific needs, making them ideal for complex or cutting-edge equipment.

Key Components of Industrial Power Supplies

To understand how industrial power supplies work, it’s important to know the key components that make up the system. Here’s a simple breakdown.

Power Source

This is where it all starts. The power source can be either AC (Alternating Current) or DC (Direct Current). Most industries use AC power because it can travel long distances with fewer losses, but certain applications, like telecommunications or automotive systems, may require DC power.

Transformers

Transformers change voltage levels. They can step up (increase) or step down (decrease) the voltage to match the needs of different machines. For example, high-voltage power might be stepped down to a lower, usable voltage.

Rectifiers

Rectifiers convert AC power to DC power, which is necessary for certain industrial equipment that can only operate on DC power.

Voltage Regulators

These devices ensure that the output voltage remains stable, even if the input voltage changes. This is critical for protecting sensitive equipment and keeping operations running smoothly.

Uninterruptible Power Supply (UPS)

A UPS system is like a safety net. It provides backup power during outages, using batteries to keep your equipment running for a short period while the primary power source is restored.

Distribution Systems

These are the networks of wires, circuit breakers, and panels that distribute power throughout your facility.

Protection Devices

These include fuses, circuit breakers, and surge protectors, which prevent electrical faults, overloads, or surges from damaging your system or causing safety risks.

Control Systems

Control systems monitor and manage the entire power supply system, ensuring everything operates efficiently and adjusts automatically when needed.

Cooling Systems

Industrial power supplies generate heat, and cooling systems, like fans or heat sinks, prevent overheating, ensuring everything runs smoothly for the long term.

Why Are Industrial Power Supplies Important?

Industrial power supplies are essential because they provide reliable power that keeps your business running. Without them, your equipment could be at risk of malfunctioning due to electrical faults, voltage spikes, or power surges. The right power supply ensures your machinery operates at full capacity, avoids costly downtime, and prevents damage to sensitive components.

Choosing the Right Industrial Power Supply

When selecting an industrial power supply, there are a few key things to consider:

• Power Requirements: understand the voltage and current your equipment needs. Make sure the power supply can handle the load, with room for any power spikes.
• Protection Features: look for features like overvoltage protection (OVP) and overcurrent protection (OCP) to prevent electrical issues.
• Backup Power: consider a UPS system if you need to avoid downtime during power outages.
• Cooling Needs: make sure the power supply has adequate cooling to prevent overheating in high-power applications.
• Compliance with Standards: look for certifications like UL, CE, and RoHS to ensure the system meets safety and environmental standards.

FAQs About Industrial Power Supplies

Q: What’s the difference between AC and DC power?

A: AC power (alternating current) is the kind that comes out of your wall socket. It flows back and forth, like a wave. DC power (direct current) flows in one direction, like a river. Most industrial equipment uses DC power.

Q: What is power supply regulation?

A: This means keeping the output voltage steady, even if the input voltage or the load changes. It’s like having a cruise control for your electricity.

Q: What does an industrial power supply do?

A: An industrial power supply provides consistent, regulated power to industrial machinery, ensuring that equipment operates reliably and efficiently without interruptions.

Q: How do I know if my power supply is failing?

A: Some signs of failure include overheating, unusual noises, inconsistent output voltage, or the smell of burning components.

Q: How often should I maintain industrial power supplies?

A: Regular maintenance, including cleaning, inspection, and testing, can help prevent failures and extend the life of your power supply. Consult the manufacturer’s recommendations for specific maintenance schedules.

Q: How do I choose the right power supply for my business?

A: You should base your choice on your equipment’s power needs, the necessary protection features, and the overall reliability required for your operations. It’s also important to consider whether you need backup power, like a UPS system, to avoid downtime.

Q: Does Alexander Electric offer customized industrial power supply solutions?

A: Yes! Alexander Electric provides tailored power supply solutions that meet the specific needs of your industrial equipment. We work with businesses to create power systems that ensure smooth and efficient operations.

Q: How reliable are Alexander Electric’s power supplies?

A: Our power supplies are designed to be highly reliable, with built-in protection features like overvoltage and overcurrent protection. We also offer maintenance services to ensure your systems are always performing at their best.

Q: Can I get a consultation from Alexander Electric to evaluate my needs?

A: Absolutely! Alexander Electric offers consultations to help businesses assess their power requirements and choose the right system for their operations. We are committed to providing solutions that improve efficiency and reduce downtime.

FAQs About Us

Q: What types of industrial power supplies does Alexander Electric offer?

A: We offer a wide range of industrial power supplies, including linear, switching, and programmable power supplies from leading manufacturers. We can help you choose the right one for your specific needs.

Q: Does Alexander Electric provide installation and maintenance services?

A: Yes, we offer professional installation and maintenance services for all types of industrial power supplies. Our experienced technicians can ensure your power supply system is installed correctly and maintained for optimal performance.

Q: What industries does Alexander Electric serve?

A: We serve a variety of industries, including manufacturing, automation, transportation, telecommunications, military and more.

Q: How can I contact Alexander Electric for a quote or more information?

A: You can contact us through our contact form, by , or by . Our team is ready to answer your questions and help you find the perfect industrial power supply solution.

Conclusion

Industrial power supplies are crucial for keeping your business running smoothly and efficiently. By understanding their key components and functions, you can make informed decisions when selecting the right system for your operations. Whether you need a basic power supply or a more complex setup with backup systems and advanced protections, choosing the right solution will help you avoid costly downtime and keep your equipment safe.

For expert advice and customized solutions, don’t hesitate to contact Alexander Electric. We’re here to help you power your business effectively.

In case you missed it

EMI Filter Components: what they are and how they work

Your browser limits use of the Used Keysight Equipment website.
Please consider switching to a current version of Chrome, Firefox, Edge or IE11 to use this site.

Selecting the right DC power supply can feel like navigating a maze. Engineers often face a barrage of questions: Does the power supply provide enough current without compromising stability? Will noise levels interfere with sensitive measurements? And what about efficiency and heat management? 

These are just a few of the challenges engineers encounter when powering up new projects or maintaining existing setups. The consequences of choosing the wrong power supply range from minor inefficiencies to equipment damage, making the decision even more critical.

In this article, we provide 18 practical tips to help you select the right DC power supply for your electrical needs. Whether you're tackling a new design or optimizing an existing system, these insights will guide you in choosing the best power supply to ensure efficiency, reliability, and safety in your applications. 

1. Know Your Power, Voltage, and Current Needs

Understanding the specific power, voltage, and current requirements of your devices or systems is the foundation for choosing the right DC power supply. Every device, from simple sensors to complex testing equipment, has unique electrical needs. 

If you underpower a device, it may not function correctly or could experience instability. Overpowering, on the other hand, could lead to overheating, damage, or even complete failure of sensitive components.

To avoid these pitfalls, calculate the minimum and maximum power, voltage, and current values your equipment requires. Start by checking the manufacturer's specifications for each device. Identify the nominal operating voltage and current, and then account for any variations under different load conditions. 

It's essential to consider both the peak and continuous current requirements to ensure you select a power supply that can handle occasional surges without being oversized for its primary function.
Here are some common voltage and current requirements for various applications:

• Microcontrollers and sensors: 3.3V or 5V, typically drawing 50-500mA
• LED drivers: 12V or 24V, with currents ranging from 500mA to several amps
• RF amplifiers: 15V to 28V, drawing currents from 1A to 10A or more
• Motor controllers: 24V, 48V, or higher, depending on the motor type and application, with currents ranging from a few amps to hundreds of amps in industrial settings

Getting these numbers wrong can lead to inefficiencies, such as increased power consumption or reduced device lifespan, and in some cases, severe equipment damage. Always double-check your calculations and choose a power supply that comfortably meets your device's needs to ensure optimal performance and longevity.

Equip Your Lab with the Best — Explore Keysight's Refurbished Power Supplies

Sort by: Model (A-Z)

• Model (A-Z)
• Model (Z-A)
• Lowest price
• Highest price
• Highest discount
• Newest first
• Oldest first

• Like-new Condition
• Updated Firmware
• Full Calibration
• New Accessories
• Like-new Warranty
• Customization possible

Learn more

• Savings of up to 90%
• Working Condition
• Calibrated or Tested
• 30-Day Right-of-Return
• No Customization
• Shipping to limited countries

Learn more

Select up to 3 instruments to compare

Select another instrument to compare Starting at Select another instrument to compare Starting at Select another instrument to compare Starting at

2. Choose Between Linear and Switching Power Supplies

When selecting a DC power supply, one of the most critical decisions is choosing between a linear or switching power supply. Each type has its own advantages and drawbacks, depending on your project's requirements for noise, efficiency, and heat management.

Linear power supplies are known for their low noise and precise output, making them ideal for powering sensitive electronic devices, such as audio equipment, laboratory instruments, and medical devices where even minimal electrical noise can interfere with accurate measurements. However, they tend to be less efficient, as they dissipate excess energy as heat, which can lead to increased cooling requirements and a larger physical size.

Switching power supplies are highly efficient, converting power with minimal waste and generating less heat. This makes them a better choice for high-power applications, portable devices, and situations where space is limited. The trade-off is that they can produce higher noise levels due to their switching frequencies, which may interfere with sensitive electronics.

Here’s a quick guide on when to choose each type:

• Choose linear power supplies when you need low noise and high stability for sensitive applications, such as:
  • Audio amplification
  • Analog signal processing
  • Medical testing device
  • Laboratory-grade measurements
• Choose switching power supplies for high-efficiency needs, portability, and compact size, such as:
  • Battery charging and power backup systems
  • Industrial automation
  • Consumer electronics
  • High-power devices in compact enclosures

Below is a comparison table to help you decide which type of power supply suits your project needs:

AspectLinear Power SupplySwitching Power SupplyNoiseVery low, ideal for sensitive devicesHigher, may interfere with sensitive devicesEfficiencyLower (typically 40-60%)Higher (typically 80-95%)SizeLarger due to heat dissipation componentsSmaller and more compactHeat GenerationHigh, requires coolingLower, more efficient heat managementCostGenerally more expensive due to componentsGenerally less expensive due to design

By understanding these differences, you can select the power supply type that aligns best with your specific project requirements, ensuring you achieve both performance and efficiency.

3. Prioritize Stable Output and Low Ripple

Ripple refers to the small, unwanted residual periodic variation of the DC output voltage within a power supply, typically originating from the AC input signal. It appears as a fluctuating noise or wave that can interfere with the stable operation of electronic circuits. In sensitive electronics, even small ripples can cause inaccuracies, errors, or degraded performance, making a stable output essential.

A stable output with low ripple is crucial for applications that require high precision, such as test and measurement equipment, communication systems, and medical devices. Low ripple ensures that the voltage supplied to sensitive components remains constant and predictable, allowing these devices to perform consistently and accurately. When ripple is minimized, it reduces the likelihood of errors in data acquisition, signal processing, and overall device functionality.
To evaluate a power supply's stability and ripple characteristics, carefully examine the specifications provided in the datasheet. Look for key terms such as:

• Ripple voltage: Often specified in millivolts peak-to-peak (mVp-p) or RMS (root mean square). A lower ripple voltage indicates a more stable output.
• Load regulation: This value shows how well the power supply maintains its output voltage despite changes in the load. Better load regulation means less deviation from the set output voltage, contributing to stability.
• Line regulation: This value indicates how well the power supply maintains its output voltage despite fluctuations in the input voltage. Lower line regulation values suggest better performance in providing stable power.

By prioritizing a power supply with low ripple and stable output, especially for high-precision applications, you ensure more reliable results, protect sensitive electronics, and maintain the accuracy and integrity of your systems.

4. Minimize Noise for Sensitive Applications

Low noise levels are vital for applications involving sensitive electronics and RF (radio frequency) equipment. In these scenarios, even minor noise fluctuations from a power supply can disrupt accurate measurements, compromise signal integrity, or cause malfunctions in the circuitry. 

For instance, in RF applications, noise from the power supply can mix with the signals being measured or transmitted, leading to distorted outputs and unreliable data.

Choosing a power supply with low noise becomes especially important in fields such as telecommunications, medical device testing, and high-frequency electronics. In these areas, the precision and clarity of signals are paramount, and any additional noise can directly affect the performance and reliability of the entire system.
When evaluating noise performance, look for the following specifications in a power supply's datasheet:

• Noise density: Measured in nanovolts per square root Hertz (nV/√Hz) or microvolts per square root Hertz (µV/√Hz), this indicates the noise level across a range of frequencies. Lower noise density means less interference with sensitive signals.
• Total noise (broadband noise): This metric represents the cumulative noise over a specified frequency range, typically measured in millivolts RMS (mVrms). A lower total noise value is preferable for applications demanding high accuracy.
• Output ripple and noise (PARD – Periodic and Random Deviation): This combines both ripple and noise measurements to provide a comprehensive view of output stability. Opt for supplies with lower PARD values to minimize signal disruption.

For applications such as telecommunications, where clear signal transmission is critical, or medical device testing, where patient safety and accurate diagnostics depend on stable power, selecting a low-noise power supply is non-negotiable.

Similarly, in high-frequency electronics like RF amplifiers or mixers, low-noise power supplies ensure that the device's output remains clear and consistent.

By understanding and assessing noise specifications, you can choose the right power supply that minimizes interference, preserves signal integrity, and ensures the highest level of accuracy and reliability in your sensitive applications.

Additional reading:
Key Questions to Ask When Ordering Abb Industrial Drives

If you are looking for more details, kindly visit SINAVA.

5. Leverage Programmable Features for Precision

Programmable power supplies provide precise control over voltage and current settings, which is essential in testing and automation environments where accuracy and repeatability are critical. 
These supplies allow you to fine-tune power parameters down to the smallest increments, ensuring that your devices receive the exact amount of power needed, minimizing risks of damage or malfunction due to power fluctuations.

Benefits of Programmable Power Supplies:

• Precise control: Fine-tune voltage and current settings to meet specific requirements, reducing the risk of overloading or under-powering devices.
• Flexibility in automated testing: Rapidly switch between different voltage and current settings, reducing downtime and increasing throughput in production lines and research labs.
• Consistent, repeatable results: Simulate various operating conditions and stress-test components with reliable power inputs for consistent results over time.

Key Features to Look For:

• Remote control: Adjust settings without physical access to the device, enhancing convenience and safety.
• Preset configurations: Save frequently used settings to streamline operations and reduce setup time.
• Integration with existing systems: Ensure compatibility with test and measurement systems, such as Keysight’s software solutions, for automated tasks and improved precision.

By leveraging programmable features, you can optimize control, accuracy, and efficiency in your testing and development processes, making them an excellent choice for environments where reliability and precision are paramount.

6. Use Multi-Output and Waveform Capabilities for Complex Projects

Multi-output power supplies offer several advantages for projects that require different voltages or currents simultaneously:

• Simultaneous testing: Test multiple components or circuits at different power levels without needing multiple power supplies, saving space and cost.
• Increased flexibility: Adapt to various testing scenarios by independently adjusting the voltage or current outputs for each channel.
• Simplified setup: Reduce clutter and complexity by consolidating power sources, streamlining your workspace and reducing potential errors.

Waveform capabilities allow you to create specific voltage or current profiles, such as ramps, pulses, or sine waves, which are essential for simulating real-world operating conditions or stress-testing components. This is particularly useful for:

• Telecommunications: Testing power delivery and signal integrity under fluctuating loads or varying power conditions.
• R&D and prototyping: Creating dynamic testing environments that mirror actual usage scenarios, helping to validate design robustness and performance.
• Automotive and aerospace: Simulating battery conditions, transient loads, or power supply fluctuations to ensure components meet stringent reliability standards.

Industries such as telecommunications, R&D, automotive, and aerospace can significantly benefit from multi-output and waveform capabilities, allowing them to handle complex projects more efficiently and accurately.

7. Pick a User-Friendly Interface

A clear, intuitive interface is essential for any power supply used in environments where frequent adjustments and monitoring are necessary. A user-friendly design minimizes the learning curve, allowing engineers and technicians to focus on their tasks rather than struggling with cumbersome controls.

Key features to look for in a user-friendly interface:

• Large, easy-to-read displays: Clearly show key parameters such as voltage, current, and power settings, ensuring quick and accurate monitoring.
• Responsive controls: Tactile buttons or rotary encoders allow precise adjustments, reducing the chances of error during configuration.
• Customizable settings: Enable saving of frequently used configurations for quick access, streamlining repetitive tasks.

A well-designed interface not only reduces operational errors by preventing misinterpretation of settings or data but also enhances productivity by making it easier to configure and monitor the power supply. This efficiency translates into more accurate results, less downtime, and a smoother overall experience, ultimately leading to higher quality in testing and development processes.

8. Consider the Size and Portability of Your Power Supply

The physical size of a power supply should align with your workspace and mobility needs. For portable applications, compact and lightweight designs are ideal, offering easy transport and convenience for fieldwork or on-the-go testing. These smaller units ensure you can carry out measurements and diagnostics wherever needed without being weighed down by bulky equipment.

However, for heavy-duty or lab-based setups that require higher power outputs, larger, more powerful stationary power supplies are necessary. These units provide robust performance and durability for continuous use, ensuring reliable power delivery for demanding applications. 

Selecting the right size and portability ensures you have the flexibility and capacity needed for your specific projects.
 

9. Choose Efficiency and Heat Management to Extend Lifespan

Efficiency in a power supply directly affects energy consumption and heat generation. Higher efficiency means less energy is wasted as heat, reducing cooling requirements and prolonging the lifespan of both the power supply and the connected equipment.

Common Heat Management Systems:

• Passive cooling: Uses natural airflow or heat sinks; it's quiet and maintenance-free but less effective in high-power applications.
• Active cooling: Incorporates fans or liquid cooling systems; it provides better cooling for high-power environments but can be noisier and may require regular maintenance.
• Hybrid cooling: Combines both passive and active methods; it offers balanced cooling and noise levels, ideal for a range of applications.

Prioritize power supplies with high-efficiency ratings to minimize heat generation, especially in continuous-use or high-power environments, to extend the equipment's lifespan and reduce operational costs.

10. Ensure Safety with Built-In Protection Features

Built-in protection mechanisms are crucial for preventing damage to both the power supply and connected devices. Features like overvoltage, overcurrent, and short-circuit protection help safeguard equipment from unexpected electrical issues, reducing the risk of costly malfunctions.

Key Protection Features:

• Overvoltage protection: Prevents excessive voltage from reaching the connected devices, protecting sensitive components from potential damage.
• Overcurrent protection: Limits the current to a safe level, preventing overheating or damage due to excessive current flow.
• Short-circuit protection: Detects and stops the power supply from delivering power in the event of a short circuit, preventing further damage to the equipment.

These safety features help maintain the longevity of both the power supply and the devices it powers, ensuring stable operation and reducing downtime.

Guidance for Verifying Safety Standards:

• Check for compliance with recognized safety certifications, such as CE, UL, or IEC.
• Review the manufacturer’s datasheet or product documentation for detailed safety feature descriptions and testing standards.

Ensuring that your power supply meets these safety standards and includes essential protection features can significantly minimize the risk of equipment failure and improve operational safety.

11. Maximize Flexibility with Parallel Outputs and Modular Designs

Parallel outputs can significantly increase total power capacity by allowing multiple outputs to be combined, providing higher power levels for projects that demand greater output. 

This feature is particularly useful when a single power supply needs to support multiple high-power devices simultaneously or when the required power exceeds the capacity of a single output channel.

Modular designs offer the advantage of expandability, allowing you to scale the power supply system as project demands change. You can add or replace modules to meet new requirements, improving flexibility without needing to invest in entirely new equipment. 

This adaptability is ideal for environments where needs frequently evolve, such as in R&D labs or production facilities.

Industries and Projects Requiring Flexibility:

• Manufacturing facilities: Where production lines may need to adapt to different product types or volumes.
• Research and development: In environments where experimental setups change frequently, and various power requirements must be met.

Prioritizing power supplies with parallel output capabilities and modular designs ensures your setup can handle growing or changing demands efficiently, offering long-term value and adaptability.

Vector Network Analyzers

Reliability in Every Reading

See ENA Special Offers

12. Invest in Reliability and Durability for Long-Term Use

Reliability is essential, especially in mission-critical applications where downtime can lead to significant costs or operational failures. In such environments, a dependable power supply is crucial to maintaining continuous operations and ensuring safety.

Durable construction and the use of high-quality components are key factors that contribute to the long-term usability of a power supply. These features help withstand demanding conditions, reduce the likelihood of failures, and extend the equipment's service life.
To ensure you select a reliable power supply, consider:

• Warranty options: Look for comprehensive warranties that cover repairs and replacements, providing peace of mind in case of defects or failures.
• Customer reviews: Gather insights from other users’ experiences to gauge the reliability and durability of the product in real-world applications.

Keysight’s new and used equipment reflects our commitment to quality. All of our used power supplies undergo rigorous testing, calibration, and refurbishment to maintain high standards, ensuring you receive equipment that is both reliable and durable. This commitment to excellence makes Keysight a trusted choice for long-term use, even with pre-owned devices.

"Customers come to us and buy used, because they get premium KS quality, with a lower price and we ship within 2 weeks." – Keysight Account Manager

13. Balance Budget with Long-Term Value

Balancing the initial cost of a power supply with its long-term value involves considering factors beyond just the purchase price. Durability, efficiency, and reduced maintenance all play crucial roles in determining the total cost of ownership. 

A power supply with a higher upfront cost but superior build quality and energy efficiency can save you money over time by reducing repair costs and lowering energy consumption.

Used power supplies offer an excellent budget-friendly option, often providing the same level of performance and reliability as new units but at a reduced cost. High-quality refurbished equipment undergoes stringent refurbishment, testing and calibration, ensuring you don't compromise on quality.

When evaluating the best value, consider the total cost of ownership:
 

FactorNew Power SupplyUsed Power SupplyInitial CostHigherLowerDurabilityDepends on brand and modelHigh, especially with refurbished equipmentEfficiencyGenerally high, may include latest technologyHigh, especially in well-maintained unitsMaintenance CostsLower, but depends on usageMay require more frequent checks but often minimalWarranty CoverageTypically longerOften available (e.g., Keysight’s 1-year warranty)Energy SavingsHigh, especially with modern efficient modelsComparable, depending on the model and condition

By considering these factors, you can choose a power supply that aligns with your budget while maximizing long-term value, ensuring both performance and cost-efficiency for your projects.

14. Automate and Collect Data for Efficiency

Power supplies with automation features can greatly enhance efficiency in large-scale testing or industrial environments by:

• Automating repetitive tasks: Reduces the need for manual adjustments, saving time and reducing errors.
• Ensuring consistent results: Maintains precise control over testing parameters for reliable data.

Data collection capabilities offer additional benefits:

• Performance tracking: Monitors power supply performance over time, allowing for early detection of issues.
• Real-time feedback adjustments: Enables dynamic setting changes to maintain optimal operation.

Look for power supplies that integrate well with data management software to streamline operations, simplify data analysis, and improve overall efficiency.

15. Ensure Calibration for Peak Performance

Regular calibration is essential to maintaining the accuracy and reliability of power supplies over time. Calibration ensures that the power supply delivers precise voltage and current levels, preventing performance degradation and reducing the risk of errors in critical applications.

Key points about calibration:

• Maintains optimal output: Ensures consistent and accurate power delivery, crucial for sensitive testing and measurement tasks.
• Prevents performance drift: Regular calibration keeps the power supply aligned with its original specifications, minimizing inaccuracies.

Check whether your power supply includes built-in calibration features for easy, on-site adjustments or if external services are required for ongoing maintenance.

Keysight’s premium used equipment is thoroughly calibrated to ensure peak performance and comes with the added benefit of a one-year warranty and post-purchase calibration service, providing peace of mind and long-term reliability.

Signal Analyzers

Rugged Precision, Anytime

See N Special Offers

18. Future-Proof Your Setup with Upgradeable Power Supplies

Investing in upgradeable power supplies helps future-proof your setup by allowing for firmware updates and the addition of new features over time. This adaptability ensures your power supply remains compatible with evolving technologies and changing project requirements, saving you the cost and hassle of purchasing new equipment.

Benefits of Upgradeable Power Supplies:

• Adapt to evolving needs: Easily upgrade with new capabilities as requirements change, extending the useful life of the power supply.
• Save time and money: Minimize the need for frequent replacements, reducing downtime and long-term expenses.

Industries Where Future-Proofing is Critical:

• Technology R&D: Where rapid advancements require flexible equipment that can adapt to new testing methods or standards.
• Large-scale industrial projects: In sectors like manufacturing or aerospace, where the ability to scale and modify equipment is crucial for meeting ongoing and future production demands.

By choosing upgradeable power supplies, you ensure your setup can keep pace with technological advancements and future project needs, providing lasting value and performance.

Power Your Innovations with the Right DC Power Supply

Choosing the right DC power supply can be challenging, but the right approach can make all the difference. By understanding your power needs, prioritizing stability, and leveraging the right features you can avoid common pitfalls that lead to inefficiencies or equipment damage. 

Whether you're concerned about budget constraints, future-proofing your setup, or meeting sustainability goals, there’s a power supply solution that meets your needs.

At Keysight, we make reliable test results accessible and affordable. Our high-quality new and used power supplies offer precision, durability, and flexibility, ensuring you have the tools you need to power your innovations confidently.

Discover how our solutions can help you achieve your goals with unmatched performance and peace of mind.

Whenever You’re Ready, Here Are 5 Ways We Can Help You

1. Browse our premium used network analyzers, oscilloscopes, signal analyzers and waveform generators.
2. Call tech support US: 1 800 829-
   Press #, then 2. Hours: 7am – 5pm MT, Mon– Fri
3. Talk to our sales support team by clicking the icon (bottom right corner) on every offer page
4. Create an account to get price alerts and access to exclusive waitlists.
5. Talk to your account manager about your specific needs

Signal Analyzers

Rugged Precision, Anytime

See N Special Offers

Did you like this article?

YesNo

For more Industrial Power Systems Equipment Supplierinformation, please contact us. We will provide professional answers.