When Compared to Glass, Know Why Polycarbonate Solid ...

Please visit our website for more information on this topic.

Everything You Need to Know Concerning Sheets Made of Polycarbonate

Reading

When Compared to Glass, Know Why Polycarbonate Solid Sheet Is the Better Option

5 minutes

Goto Songmei to know more.

Next

The Variations There Will Be Gazebos and Pergolas Everywhere

What is the difference between the hollow polycarbonate and solid polycarbonate?

Both hollow polycarbonate panels and solid polycarbonate panels belong to the PC series of panels. For customers who have never used them or know little about them, they will feel that these two panels are similar, but in terms of practical applications, the two are relatively large different, so it is important to understand their differences in application selection. UNQ polycarbonate sheeting manufacturer will take you to understand their distinctions and choices.
In short, PC solid board is single-layer solid; but the price is higher,twinwall and multiwall polycarbonate is also called hollow board, as the literal meaning is that the middle is hollow, it has single-layer, double-layer or even multi-layer and It is hollow; its sound insulation and heat insulation performance is much better than that of solid ones, and it is not easy to cause cracks due to thermal expansion and contraction, but the pressure bearing is not as good as that of solid boards. It is usually better for canopies, carports and greenhouses A kind of material is affordable for generalization. It can be distinguished from the weight. Because the solar panel is hollow, the material used is relatively small, and the solid board with the same thickness and area is much heavier than the solar panel.
Hollow polycarbonate panels: The main use is for lighting sheds. Its sound insulation and heat insulation effects are much better than those of solid ones, and it is not easy to cause cracks due to thermal expansion and contraction. But the pressure bearing is not as good as that of the solid plate. The pressure bearing of the solid plate is very good, and the hammer will not rot. Of course, the sun shed does not bear much pressure, and once it is installed, there is no pressure on it.
Solid solid board: The main purpose is advertising light boxes. Advertising light boxes are rarely used for more than ten years. Therefore, solid boards generally add less UV layer, which leads to poor sunlight resistance and easy aging. Adding UV layer under the sun is more resistant to sunlight than compression. It is more critical, the solid board that is not fast and hard will also age quickly. Solid slabs are more prone to cracking than hollow slabs, especially at drilled locations.