When were white LED lights invented?

White LED Adoption

For more information, please visit white cob led.

White LEDs present significant benefits vs. traditional technologies. Perhaps, the most important contribution to society is white LED&#;s enablement to achieve a quicker path to carbon neutrality with its reduced energy usage. Several additional benefits have been delivered, including a small form factor which enables devices to utilize light in a manner that never previously existed. Complementing the energy savings benefit, white LEDs also offer very long lifetime and an environmentally friendly light source without any hazardous materials, such as mercury.

Many applications have benefited from white LEDs and could not have been created without Nichia&#;s invention, including smartphones, tablets, thin LCD TVs and Notebook PCs, slim stylish automotive LED headlights, LED light bulbs, lighting systems with dimming and color tuning, bright and comfortable outdoor lighting on highways, and many more. People could not see and enjoy these products if Nichia had not invented the white LED. A historic invention generated through a miracle marriage of Nichia&#;s competence in blue LEDs and phosphors has truly changed the world. 

For more information...

___

© LED professional / Luger Research e.U.

Compared to incandescent lightbulbs, LEDs produce a lot more lumens per watt of input power &#; they&#;re more efficient at producing light.  Of course, that means that incandescent light bulbs are more efficient at producing heat, and as the days get shorter, and the nights get colder, somewhere, someone who took the leap to LED lighting has a furnace that&#;s working overtime. And that someone might also wonder how we got here: a world lit by esoteric inorganic semiconductors illuminating phosphors.

The fact that diodes emit light under certain conditions has been known for over 100 years; the first light-emitting diode was discovered at Marconi Labs in in a cat&#;s whisker detector, the first kind of diode. This discovery was simply a scientific curiosity until another discovery at Texas Instruments revealed infrared light emissions from a tunnel diode constructed from a gallium arsenide substrate. This infrared LED was then patented by TI, and a project began to manufacture these infrared light emitting diodes.

But infrared light is invisible to the human eye, and not useful for any sort of indication or lighting. The first visible-spectrum LED was built at General Electric in , with the first commercially available (red) LEDs produced by the Monsanto Company in . HP began production of LEDs that year, using the same gallium arsenide phosphate used by Monsanto. These HP LEDs found their way into very tiny seven-segment LED displays used in HP calculators of the s.

From the infrared LEDs of the early s to the red LEDs of the late s, the s saw orange-red, orange, yellow, and finally green LEDs. There&#;s a trend to these developments, and it has to do with electron gaps. For a diode to generate light, you must first put energy into an electron. This energy makes the electron jump from its natural state in a valence band to a conduction band. This energy isn&#;t enough to keep the electron in the conduction band, so it will eventually fall back into the hole it left in the valence band. In doing so, it releases energy back again in the form of a photon.

Want more information on cree cob chip distributor? Feel free to contact us.

The more energy it took to move the electron into a conduction band, the more energy that is released as a photon, in the form of higher frequency light. The reason that infrared LEDs came before red LEDs, and green LEDs came after that is that it&#;s simply harder to climb these bandgaps and find an LED substrate that will emit higher frequencies of light.

Infrared, red, and even green LEDs were &#;easy&#;, but blue LEDs require a much larger bandgap, and therefore required more exotic materials. The puzzle behind making a high-brightness blue LED was first cracked in at the Nichia Corporation using indium gallium nitride. At the same time, Isamu Akasaki and Hiroshi Amano at Nagoya University developed a gallium nitride substrate for LEDs, for which they won the Nobel Prize in Physics. With red, green, and blue LEDs, the only thing stopping anyone from building a white LED was putting all these colors in the same package.

Red, Green, but mostly Blue LEDs

The first white LEDs weren&#;t explicitly white LEDs. Instead, red, green, and blue LEDs were packed into a single LED enclosure. However, if you mix red, green, and blue light, you will get white light, it&#;s really just a matter of getting the correct proportions of different colored photons.

This remains the standard for RGB LEDs, and some have even experimented with improving the range of color these LEDs can produce. The human eye is extremely sensitive to green frequencies of light, and by adding a fourth LED to a package &#; it&#;s best called &#;emerald&#;, or a slightly bluer shade of green than what we&#;re used to in green LEDs &#; you can make an LED with a wider color range, or if you prefer, a whiter white.

This was the first method of developing a white LED, and while the LED light bulbs you pick up at the hardware store don&#;t have individual red, green, and blue LEDs inside, it is still a fantastically popular way of creating more colors with LEDs. Those neopixels, WSs, or APA101s, all have red, green, and blue LEDs tucked inside one enclosure. Some of the more advanced individually addressable RGB LEDs even add a fourth LED, for white. But how are those individual white LEDs made?

The first white LEDs, made without three individual LEDs, were made with the magic of phosphors. Phosphors are a well-understood science, most commonly found in lighting applications in fluorescent bulbs. Fluorescent bulbs don&#;t produce white light on their own, they produce ultraviolet light by exciting mercury vapor. However, by coating the inside of a fluorescent bulb with a powder, this ultraviolet light can be converted into red, green, and blue light. The result is a fluorescent bulb that lights your garage or workshop.

This can be done with LEDs as well. With an ultraviolet or violet LED packaged inside a phosphor-coated enclosure, you can make a white LED. This is known as a full-conversion white LED.

Full conversion LEDs are inefficient, though, so by the mid-90s the race was on to create a partial conversion LED. This type of LED would illuminate a phosphor with blue light, and the phosphor would convert a portion of that blue light into something broadly yellowish that contains a mixture of red and green wavelengths. Adding more red phosphors to the mix creates &#;warm white&#; LEDs.

In , the Nichia Company announced the production of white LEDs, and the rest is history. For the past twenty years, the power, efficiency, and brightness of these LEDs has increased. Now, or in the very near future, the default for home lighting won&#;t be incandescent bulbs, but powerful LEDs consuming a mere fraction of the energy an old Edison bulb would, shifting more of the task of keeping your house warm onto the heater.

For more 100w led chip lumensinformation, please contact us. We will provide professional answers.