Where should a water softener be located?

One of the most common questions our experts get asked is about where they can install water softeners. Many people assume home water systems are installed under the sink, but this isn&#;t always the case. In fact, an installation expert, like one of our local experts, will discuss with you the best place to install your water softener, inside or outside.

For more information, please visit UVDF.

Important things to consider when installing a water softener

There are several important features that the location where your water softener is installed should have. It is crucial that wherever your water softener is installed it is easily accessible, as you will need to add salt to the brine tank to ensure that it continues to provide soft water.

It should also be on a flat, level surface near the entry of the water supply to your property, and have safe drainage options. Because a water softener uses some electricity for the smart technology and to control the regeneration process, it should also have access to a power supply.

If at all possible, it is best to avoid installing water softeners in places that will experience freezing temperatures. However, it is important to install yours in the best place for your home. This could be a number of places, from under the kitchen sink to the garage to the outdoors.

Image showing water softener location criteria

Basement

Basements are often considered to be good locations for water softeners. This is because they are large enough to contain and access a softener of any size, as well as other necessary water treatment equipment. This may also be where your water heater is, so keeping your equipment centralised can help with diagnosing and fixing problems, as well as with the maintenance of equipment.

Garage

Garages are another reasonably large space for water softeners that tend to be easier to access than basements due to the absence of stairs. This means that you will have to put less effort into transporting the salt to the softener, and it will be accessible for you if it requires maintenance.

Crawl space

Our compact water softeners are perfect for small crawl spaces, so they should be accessible even if they&#;re hidden away in a cupboard. Crawl spaces help your water softeners take up less room. They also often provide access to pipes without taking up too much space or having to do additional plumbing work to ensure that everything is connected the way it should be.

Utility room

Utility rooms give good access to plumbing systems, although innovative storage solutions may be needed to ensure that your water softener fits into the often small space. They&#;re fantastic solutions if your home doesn&#;t have a garage or a basement, and are easily accessible for maintenance and salt replacement. You might even already have a place to store the salt needed in your utility room!

EcoWater dual-tank water softener installed in a utility room

Outside

Storing water softeners outside is possible. It may even be the best option if your home is limited in space near the entry point of the water supply from the outside. However, there are also a few things to consider when it comes to outdoor installation. The softener must be protected from the elements, including freezing temperatures and direct sunlight, as well as insects, vermin and vandalism.

How do I protect my outdoor water softener?

There are protective casings you can find that will help protect your outside water softener from the elements. You can also include extra protection like placing part of it in a small hole if necessary. You should also ensure that it isn&#;t in direct sunlight as the UV rays from the sun can cause deterioration, reducing efficiency. Our experts are able to fully recommend what you will need when housing your water softener outdoors, so there&#;s no need to worry about.

Postcode

Your water is:

Summary

Water softeners are most often installed inside a house, whether that&#;s in the basement, kitchen garage, utility room or crawl space. However, it&#;s also possible to install water softeners outside. They need to be protected from the elements, extreme temperatures and direct sunlight, but a water softener installation expert can advise you on the necessary measures for your outside water softener.

If you&#;re interested in finding out more about our water softeners and where the best place to install them in your house is, speak to one of our local experts now. Our experts can supply and fit your water softener where you want, and our free site surveys will help you understand how much work will be needed. We endeavour to reduce fuss and drama with simple solutions.

You&#;ve made the decision to get a water softener to address all of your home&#;s hard water problems. Although you now know the answer to these problems, you may still be left with plenty of questions about what type of equipment you need and more importantly, where is the best place to have this equipment installed.

Whether you have a full-sized basement, crawl space, closet, or another area in mind, there are many factors to consider when thinking about water softener installation.

If you want to learn more, please visit our website Home Water Softener.

The First Step: Understanding Your Water

Before you even think about installation, the very first thing you need to do is understand what&#;s in your water and consider your household&#;s needs. Knowing this information is important to determine the size and type of softener necessary to treat your water and accommodate your lifestyle.

The physical size of the softener will determine how much space is needed for installation. Water treatment professionals determine the appropriate size by considering several factors including the flow rate, the amount of water your household uses and the quality of your water.

It&#;s important to consider the flow rate to make sure your home does not run out of softened water. Flow rate, measured in gallons per minute (gpm), is determined by considering all of the fixtures and appliances in your home that may operate at the same time. If flow rate isn&#;t considered when selecting a system, and your softener is too small, you may experience decreased water pressure and hardness coming through the system.

Another factor is water usage. According to the United States Geological Survey (USGS), the average person uses 80-100 gallons of water per day. While that amount might be surprising, consider each time the shower, bath or sink faucets are run, toilets are flushed, and laundry is done. It&#;s easy to consume gallons of water without even realizing it. To size your softener appropriately, you&#;ll want to multiply the number of gallons each person uses by the number of people living in your home.

Water treatment professionals will also look at the hardness of your water. Hardness is the amount of dissolved calcium and magnesium in your water and is measured in grains per gallon (gpg). This helps determine the amount of media needed inside your water softener to remove hardness. The bigger the system, the more media it can hold, and the more hardness it can remove. In addition to hardness, there may also be iron in your water, requiring a separate filter or a system that handles both iron and hardness removal.

To accurately determine what is in your water, including other possible contaminants, you should consult with a water treatment professional to conduct a comprehensive water test. They will recommend the proper equipment to adequately treat your water and accommodate your household&#;s needs. With a better understanding of the right equipment required, we can consider the location of the system next.

Where Should Your Water Softener Go?

The ideal location for a water softener is on level ground, near the water&#;s point of entry into the house. If your home uses well water, the entry point is generally next to the pressure tank. If your home uses city water, it&#;s usually next to the water meter. A drain and a power source should also be nearby, and there should be enough space to accommodate the size of the equipment.

In the warmer states, like Florida, where basements are not common, you can also install your water softener or filter outside. Many water treatment professionals will dig a hole to minimize how much of the equipment is exposed to the elements or position it inside a small shed.

Most homes will require a relatively small footprint for a standard-sized water softener. As long as there&#;s access to plumbing, piping, a drain, and power, a water softener can go wherever a homeowner wants, as long as it&#;s within code restrictions and equipment performance requirements, such as the temperature. Water softeners won&#;t work in unheated areas where the temperature can get below freezing. The softener should also not be in direct sunlight. The optimal temperature of the location should be between 35 and 100 degrees Fahrenheit.

Here are some examples of common locations where water softeners are installed:

Basement

Most homeowners choose to have their system installed in the basement. A full basement generally has enough space to accommodate any size softener as well as a variety of other water treatment equipment. Although they should be near the water source, a drain, and power supply, water softeners are typically installed near the home&#;s water heater to keep the equipment centralized.

Crawl Space

Some crawl spaces can accommodate water softeners, but the size of the system may be limited depending on the space available. Before your equipment is installed, proper measurements should be taken to make sure it will fit comfortably. Because the brine tank needs to be filled with water softener salt on a regular basis, having easy access should be considered before committing to a crawl space location.

Garage

For homes without basements or crawl spaces, a garage is another great option for water softener installation. Typically, a garage provides plenty of space and storing softener salt is more convenient than hauling it in the basement. Sometimes, additional plumbing work is necessary for garage installations, and you&#;ll also want to make sure the area is temperature-controlled to stay within the ideal range for your softener to function correctly.

Utility Room

For homes without a basement or garage, systems can be installed in a utility room. These spaces tend to be small and so creative problem solving may be necessary. Cabins or other seasonal dwellings constructed on a slab may have few options available. Closets or utility rooms can be a good fit for a unit after some extra effort to create a drain for the system.

Trust a Water Treatment Professional&#;s Expertise for Installation

There are water treatment solutions for almost every situation. The only way to determine the best approach to your unique needs, is to consult with a water treatment professional. In the long run, the right recommendation and proper installation could save you headaches and maintenance issues down the road.

Contact us to find an authorized Water-Right dealer in your area.

 

Contact us to discuss your requirements of Wholesale Water Softeners. Our experienced sales team can help you identify the options that best suit your needs.