Oil seal: how do I install it correctly? - ERIKs

When it involves a repair, you must first remove the old oil seal. To remove an oil seal, it is important to use the right tools to avoid damaging the shaft and bore. The best solution is therefore to pull out the oil seal without having to completely dismantle the shaft. This can be done by making a few holes in the oil seal with an awl and a hammer. You can then use a hook to pull the oil seal out of its seat. You could also screw some screws into the holes and then slowly pull out the screws to extract the oil seal from its housing. Be careful not to damage the shaft or housing in the process.

For more information, please visit oil seal manufacturing process.

If the shaft or housing gets damaged, it must be repaired. If you replace only the oil seal, but the shaft or bore remain damaged, then there is a chance of premature failure or leakage. You can easily repair the shaft, for example using an SKF Speedi-Sleeve.

NNK brand takes you to find out the answer.

Due to the special working environment, the oil seal has relatively high requirements on its sealing performance, temperature resistance, wear resistance and pressure resistance, so as to ensure its adaptability to different working environments. Therefore, oil seal products should have higher requirements in terms of appearance and material. A good oil seal product is not only reflected in product performance, but also in terms of packaging and quality inspection and after-sales service. Therefore, if you want to make a good oil seal, you must start from these points. For these problems, NOK-CN factory does this:

Product oil seal metal shell by our self

If you want the product to have strong pressure resistance, you must start with the metal skeleton. The oil seal frame must be thick enough to support the entire oil seal to ensure its service life. Product oil seal metal shell by our self. Our shells are fully treated to prevent rust and increase the adhesion. After soaking in the solution prepared by us for many times, they are dried and completed under precise temperature control.

Use the best raw materials

If you want to improve the wear resistance and temperature resistance, it depends on the rubber. We have been committed to using the best raw materials, all from imports. Regarding some common materials such as nitrile(NBR) rubber, fluororubber(FKM), hydrogenated nitrile rubber, and silicone rubber, NNK is also actively working on material development. Moreover, it also uses its own blending technology to carry out polytetrafluoroethylene production at the same time. The development and improvement of engineering plastics such as resin, polyamide (nylon) resin, etc., achieve quality assurance through the improvement of materials.

The company is the world’s best quality nbr rubber parts for sealing supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Better Machines More Professional Vulcanization

Then there is vulcanization molding. Our NOK-CN factory vulcanization process is very mature. Our products have a long vulcanization time and higher performance. And our machines are replaced regularly, and we have been pursuing the best quality.

High-precision quality inspection

We refurbish the produced products and add springs to ensure tightness.

We will conduct random inspection and mixed inspection of the products. The products of NOK-CN seal factory adopt ISO and TS quality assurance system. After strict quality control, we continue to improve our product process, research and development and service quality. Accurate handling of material properties and precise requirements for mold accuracy ensure a 100% product pass rate and enhance the core competitiveness of products.

Better packaging and service

The last is to do the packaging with heart, and deliver the goods to our customers in the fastest and best way.

After doing these points, not only will the brand's popularity become higher and higher, but customers will also trust our products more and more. There is also a perfect after-sales service is also necessary to do.A trusted brand is also a plus for a good oil seal product. Products that must be trusted by customers are also what NNK oil seals have been pursuing.

NNK oil seal product by NOK-CN factory

If you want to learn more, please visit our website rubber oil seals manufacturers.